Maximum Sewing Speed Setting - Brother PR670E Operation Manual

i Touch .
 The needle bar is positioned in the lower-left corner
of the pattern. The embroidery frame moves so that
the needle is positioned correctly.
j Touch .
k Use to align the needle with the end of
embroidering for the previous pattern.
Note
• You can also follow the procedure in
page 90 to find the sewing position, by
directly place the needle over the end of the
previous pattern.
l Touch .
m Touch , and then press the start/stop
button to begin embroidering the remaining
character patterns.
116
Maximum Sewing Speed
Setting
The maximum sewing speed can be set to one of
seven levels at every 100 spm between 400 and
1000 spm. If Cap frame, Cylinder frame or Clamp
frame is used, the maximum sewing speed can be
set to one of five levels at every 50 spm between
400 and 600 spm.
Maximum sewing speed
Embroidery frame/Flat
frame/
Round frame/
or other frames
1 1000
2 900
3 800
4 700
5 600
6 500
7 400
The maximum sewing speed setting is specified
from the embroidering screen.
When the embroidery machine is purchased, the
maximum sewing speed is set to 1000 spm (Cap
frame, Cylinder frame or Clamp frame for 600
spm).
For the types of embroidery frames, refer to "Types
of embroidery frames/frame holders and their
applications" on page 82.
a To increase the sewing speed, touch
decrease the sewing speed, touch
 The value beside
Cap frame/
Cylinder frame/
Clamp frame
1 600
2 550
3 500
4 450
5 400
– –
– –
. To
.
and changes.