Switching The 4-Digit Display; Setting The Sewing Speed; Setting The Maximum Sewing Speed - Brother S-7250A Instruction Manual

4-2. Switching the 4-digit display

・ The 4-digit display can be changed to one of the following five statuses
Stitch no. display or no display -> Speed display -> Counter display -> Locus display -> (Program display)
*1: The display switches to program display only when memory switch No. 470 is set to "1".
(Refer to the Service Manual for details on changing memory switch No. 470.)
・ When the speed display or counter display appears, you can press the
Display mode
Stitch number
ON
display
Sewing speed
display
ON
Counter display
ON
Flashing
Locus display
Program
display

4-3. Setting the sewing speed

4-3-1. Setting the maximum sewing speed

1
2
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
ON
ON
ON
Flashing
ON ON
ON
Flashing
Press the
・ The maximum sewing speed setting value will appear in the 4-digit
display.
Press the C
・ When the D
・ When the C
NOTE:
The setting range is from 220 to 4000 sti/min.
S-7250A
*1
each time the
key to switch to another display.
ABCD stitch number display
Maximum sewing speed setting
value
Backtack sewing speed setting
value
Lower thread counter value
Lower thread counter warning
enabled
Production counter value
Needle
value
Needle
warning enabled
ON
Locus setting value
ON Program
parameters
key so that the
/D keys to change the setting value.
key is pressed, the setting increases by 100.
key is pressed, the setting decreases by 100.
key is pressed.
4-digit display
replacement counter
replacement counter
number or setting
indicator illuminates.
1355D
1356D
18