Download  Print this page

Delete File - Siemens SINUMERIK 840D Operator's Manual

Computerized numerical control system for machine tools.
Hide thumbs


Program Operating Area
6.7 Manage programs

6.7.11 Delete file

This section explains how you can delete workpieces or files.
Operating sequence
Position the cursor on the workpiece or the file you want to delete.
Delete several files:
If you want to select several files, position the cursor on the first file,
press the "Select" key and then place the cursor on the last file.
The files you have selected are highlighted.
The prompt "Do you really want to delete the file?" appears.
Confirm your input.
Further information
You can only delete programs that are not currently running.
If you want to delete a workpiece directory, make sure that none
of the programs it contains is currently selected.
If a workpiece directory is deleted, all the files that it contains are
deleted at the same time.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
 Siemens AG, 2004. All rights reserved


Comments to this Manuals

Symbols: 0
Latest comments: