Siemens SINUMERIK 840D Operator's Manual page 101

4
03.04
+X X
...
X
9th Axis
...
+
Cycle Start
Delete
block
Insert
block
Save
block
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Turning machine:
Press the "Axis" keys.
Milling machine:
Select the axis to be traversed
and then press the "+" or "–" key.
The axis name and the path being traversed are displayed
continuously on the screen in the "Teach In program" window.
The axis name and axis positions are transferred to the MDA program
as values referred to the workpiece coordinate system.
Saving the position value:
The position values of the axes can be altered in the clipboard until
this block is saved with the "Cycle Start" key.
When you use the "Save block" function for the first time you will be
asked to enter the name of the teach program.
The teach program is now set for the duration of the MDA/Teach in
procedure.
After "Jog" or "AUTO" mode has been selected, a new Teach program
can be set.
Additional functions:
Place the cursor at the desired position in the "Buffer" window.
Enter the additional functions (e.g. feedrates, miscellaneous functions,
etc.) in the program (if permitted).
Delete/insert/save block:
Position the cursor at the desired point.
The block is deleted automatically.
The block stored in the delete memory is automatically inserted in
front of the line in which the cursor is located.
New position values and miscellaneous functions are saved.
Machine Operating Area
4.5 MDA operating mode
4
4-101