Saving Data To Nc Card - Siemens SINUMERIK 840D Operator's Manual

7
Services Operating Area
7.5 Main services screen

7.5.11 Saving data to NC card

Data out
NC card
Start
OK
7-276
Function
For saving data to NC-Card there is at least 3MB (or 8MB Memory
Flash Card) available.
The files listed in the data overview ("Organize data" window) can be
saved to the NC card.
Cycle alarm texts can be stored as well as start-up data, workpieces,
etc.
Precondition: Directory "ARC.DIR" must already exist on the card.
Operating sequence
When you select the "Data out" softkey, the directories or files that
you can select by paging and the cursor key are displayed; activate
"Organize data" window if appropriate.
You can open the directory or file with the "Input" key.
Select softkey "NC card"
When you select softkey "Start" the "Create archive" window appears.
Enter a name and confirm with "OK".
If you want to read these files back from the NC card, follow the same
sequence in reverse order.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
7
03.04
 Siemens AG, 2004. All rights reserved