Setting The Time/Date - Siemens SINUMERIK 840D Operator's Manual

8
03.04
PLC
Read in
operands
OK

8.4.4 Setting the time/date

PLC
Set date/
clock
Accept
References
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
You can enter as many comments and operand/format lines as you
wish. In accordance with the PLC status display only the first 10
operands/format lines are read in.
Operating sequence
The function can also be selected in the "Services" operating area.
Press softkey "PLC".
The first operand screen form appears.
The vertical softkey bar changes.
Press softkey "Read in operands" (via application diskette).
Position the cursor on the operand form you wish to find and confirm
by pressing softkey "OK".
The screen form you selected is imported into the PLC status display.
Function
You can set the date and time on the PLC and synchronize the date
and time between the PLC and HMI Embedded.
Operating sequence
Press the "PLC" softkey.
The horizontal and vertical softkey bars change.
Press the "Set date/clock" softkey. Open the window to enter the date
and time.
Use the cursor key to move to the input fields of date (day/month/
year) and time (hour/min./second).
Enter the correct values in the fields and save these with the "Input"
key.
By pressing "Accept", the date and time of HMI Embedded are
transferred to the PLC.
You can check the synchronization in the "Current:" output field.
/IAM/ IM2: HMI Installation & Start-up Guide,
Diagnosis Operating Area
8.4 PLC
8
8-293