Siemens SINUMERIK 840D Operator's Manual page 285

8
03.04
Service
displays
Service
SI
Axis +
Axis -
SGE/SGA
SPL
SGE/SGA
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Operating sequence
Select the menu headed "Service displays".
The horizontal softkey bars change.
The "Service SI" window displays information about Safety Integrated
data together with the associated axis name and axis number.
The service values of the next (+) and the previous (-) axis are
displayed.
Use this softkey to display the safety-relevant input and output signals
SGE and SGA.
Use this softkey to display the safe programmable logic signals SPL.
Diagnosis Chan1 Jog
Channel reset
Program aborted
Safty Integrated SGE/SGA
SGE
Safe input signals NCK bit 0...15
Safe input signals drive bit 0...15
Safe input signals NCK bit 16...31
Safe input signals drive bit 16...31
SGA
Safe ouput signals NCK bit 0...15
Safe ouput signals drive bit 0...15
Safe ouput signals NCK bit 16...31
Safe ouput signals drive bit 16...31
Service Service Service SI
System
axis drive
resources
The available signals can be seen in the above screen.
The vertical softkey Status SI takes you to the Status SI screen,
SPL opens the Safe Programmable Logic screen.
Diagnosis Operating Area
8.3 Service display
MPF.DIR
SP25.MPF
X1
0000 0000 0000 0000
0000 0000 0000 0000
0000 0000 0000 0000
0000 0000 0000 0000
0000 0000 0000 0000
0000 0000 0000 0000
0000 0000 0000 0000
0000 0000 0000 0000
Comm. Action
log log
8
Axis +
Axis -
Status SI
SGF/SGA
SPL
Version
8-285