Confirming/Canceling Input; Editing A Part Program In The Ascii Editor - Siemens SINUMERIK 840D Operator's Manual

2
Operator Components/Operating Sequences
2.5 General operating sequences

2.5.6 Confirming/canceling input

OK
Abort

2.5.7 Editing a part program in the ASCII Editor

2-54
Confirming input:
Your inputs are accepted when you press softkey "OK". The selected
function is executed. The window is closed, and you return to the call
menu level.
Canceling input:
Your inputs are rejected if you select the "Abort" softkey. The selected
function is aborted. The window is closed and you return to the menu
level from which the window was called.
The response is the same on return from a function (vertical softkey
bar).
The "Insert" key can also have an "Undo" function if you abandon the
input/modification you have just entered. The cursor remains
positioned in the currently selected field.
Switch from the horizontal menu level back to the call menu level.
Function
The ASCII editor provides you with the following functions:
•
Switch between insert and overwrite mode
•
Mark, copy, delete block
•
Paste block
•
Position cursor / find/replace text
•
Create contour (programming support)
•
Configure cycle parameters (drilling, milling, turning)
•
Start simulation
•
Recompile (cycles, free contour programming)
•
Renumber blocks
•
Change settings
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
2
03.04
 Siemens AG, 2004. All rights reserved