Download  Print this page

Siemens SINUMERIK 840D Operator's Manual Page 310

Computerized numerical control system for machine tools.
Hide thumbs

Advertisement

10
Service
10.1 Operating data
10.1
Operating data
Operating data
References
10.2
Cleaning
Cleaning agents
10-310
Air humidity, humidity class to DIN 40040
Atmospheric pressure
Shock protection,
Protection class to DIN VDE 0160
Degree of protection according to DIN 40050
• Operator panel (front)
• Operator panel front (rear)
• Machine control panel (front)
• Machine control panel (rear)
You can find a complete summary of operating data on the
appropriate supplementary sheets or in the documentation:
/BH/ Operator Components, Manual
The front of the monitor and the surface of the operator panel front
can be cleaned. For dirt that is relatively easy to remove, standard
household dish washing liquid, or an industrial cleaner (such as
"Special Swipe") can be used. These cleaners will also remove dirt
containing graphite.
Cleansing agents which contain one or more of the following
ingredients can be used for a short period of time:
Thinned mineral spirits
Bases
Organic hydrocarbons
Dissolved detergents
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
10
03.04
Value
F
860 to 1080 hPa
I
IP 54
IP 00
IP 54
IP 00
 Siemens AG, 2004. All rights reserved

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: