The Product Sinumerik 840D/810D - Siemens SINUMERIK 840D Operator's Manual

1
Introduction

1.1 The product SINUMERIK 840D/810D

1.1 The product SINUMERIK 840D/810D
General
1-20
SINUMERIK 840D and 810D are CNC control systems (Computerized
Numerical Control) for machine tools.
You can implement the following basic functions (for a machine tool)
via the operator panel front of the CNC control:
•
Creating and adapting parts programs.
•
Execution of parts programs,
•
Manual control,
•
Input and output of parts programs and data,
•
Editing of data for programs,
•
Display and precisely recover alarms,
•
Editing machine data,
•
Creating communication connections between 1 or more
PCUs, or 1 or more NCs
(m:n, m-HMI units and n-NCK/PLC units).
The user can call up all the functions via the user interface.
The user interface consists of:
•
Display devices such as a screen, light diodes, etc.
•
Operator controls such as keys, switches, hand wheels, etc.
This Operator's Guide describes the procedure for PCU/PC with the
HMI Embedded Software, SW 6.5
The HMI Embedded software is installed in the PCU as standard
when supplied from the factory.
Read Chapter 2 "Operator Components" carefully before proceeding
with further chapters.
All subsequent chapters are written on the assumption that you have
done so!
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
1
03.04
 Siemens AG, 2004. All rights reserved