Delete Coupling Module (Cpdel) - Siemens SINUMERIK 840D sl Function Manual

Programming
Syntax:
Designation:
Functionality:
Following axis/
spindle:
Example:
Programming
CPDEF=(X2)
Boundary conditions
● The maximum number of coupling modules is limited (see Section "Requirements
(Page 368)").
● The application of CPDEF to an already created coupling module is possible and will not
result in an alarm being generated.
8.5.3.2

Delete coupling module (CPDEL)

A coupling module created with CPDEF can be deleted with CPDEL.
Programming
Syntax:
Designation:
Functionality:
Following axis/
spindle:
Special functions
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
CPDEF= (<following axis/spindle>)
Coupling Definition
Definition of a coupling module The coupling is not activated.
Type: AXIS
Range of values: All defined axis and spindle names in the channel
Comment
; A coupling module is created with axis X2 as following
axis.
CPDEL= (<following axis/spindle>)
Coupling Delete
Deletion of a coupling module. All leading axis modules are deleted with
the coupling module and reserved memory is released.
Type: AXIS
Range of values: All defined axis and spindle names in the channel
M3: Coupled axes
8.5 Generic coupling
377