Coordinate system for
changing the actual value
4.2.4 Display axis feedrates
Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
4.2 General functions and displays
Via the MD you can define whether the actual values are to be
without the programmed offsets = WCS or
including programmed offsets = SZS (settable zero offset
/FB1/K2: Coordinate Systems...
In operating mode "Jog" or "MDA" or "AUTO", you can display the
current feedrate, residual path information and the associated
"Jog" mode is selected in the "Machine" operating area.
Press the "Axis feedrate" softkey:
On "MCS" the feedrate window with the current feedrates and
the residual path information, as well as the associated override
data, is displayed.
On "WCS", the feedrate window is displayed for the axes that
are subject to the interpolation, with current feedrate, residual
path information and path override, as well as for the other axes
with current feedrate, residual path information and single axis
You can use the "Page" keys to display other axes if required.
Machine Operating Area