Download  Print this page

Siemens SINUMERIK 840D Operator's Manual Page 265

Computerized numerical control system for machine tools.
Hide thumbs


Copy and
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Select source:
Position the cursor on the file that you wish to place in the data
structure of the control.
Position the cursor in the top window by selecting the "Window
selection" key. The top window is then active.
Select target:
Position the cursor on the target directory in which you wish to place
the file you have just located.
A confirmation window is displayed.
If you wish to retain the file name stored in the clipboard, confirm by
pressing softkey "OK".
If you want to use another file name, enter the new name and
terminate your input by pressing softkey "OK". The file is copied into
the target directory and is not deleted from the clipboard.
Go back to the directory overview by pressing softkey "Back".
You can only delete data from the clipboard with the "Delete" key.
Files stored in the clipboard are not automatically deleted when
placed in the data structure.
You must ensure that the clipboard is cleared so that it does not take
up too much memory space unnecessarily.
Services Operating Area
7.5 Main services screen


Comments to this Manuals

Symbols: 0
Latest comments: