Siemens SINUMERIK 840D Operator's Manual page 147

5
03.04
1.
Find empty
location
2.
Current
location
3.
Load
location
Abort
OK
Tool list
Load
Find empty
location
Abort
OK
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Enter the "Tool size" and "Location type" in the dialog box.
If more than one loading point is configured, select the desired loading
point from a query window.
The system searches for a suitable empty location.
The cursor bar is automatically positioned on the magazine location
found in the "Magazine list".
You have found an empty location in front of the current loading point.
When you select "current location," the tool is loaded to the empty
location in front of the loading point.
The cursor bar is automatically positioned in the "Magazine list" on the
magazine location found in front of the loading point.
Position the cursor on the location of your choice in the magazine list.
"Load directly to spindle" is possible if the cursor is positioned on the
spindle magazine location.
Use the input key to accept the entries for the tool identifier, duplo No.
etc.
Abort the loading operation.
Confirm your inputs with "OK".
Load from "Tool list":
The "Tool list" menu is selected.
The appropriate tool is selected.
Press the "Load" softkey.
The vertical softkey bar changes.
After pressing the "Find empty location" softkey, the system searches
for a suitable location and displays it.
Abort the loading operation.
Initiate the loading operation.
The location found is entered under the location number.
If data are still missing, the tool data display is opened with the
missing data set to their defaults. You can start the loading operation
again.
Parameters Operating Area
5.3 Tool management
5
5-147