Reading In Data Via Rs-232 Interface - Siemens SINUMERIK 840D Operator's Manual

7
Services Operating Area
7.5 Main services screen
Save
settings
7.5.2

Reading in data via RS-232 interface

Data in
RS 232 C
user
RS 232 C
PG/PC
Save
settings
7-262
Close the parameter setting display by pressing the "Save settings"
softkey.
The data for the interface are stored with the values you have
entered.
(See also Section "Interface parameters")
Function
It is possible to read data into a particular directory or into the
clipboard via the RS-232 interface.
Operating sequence
The interface for your data unit is set correctly.
When you press softkey "Data in", the currently selected RS-232-C
interface parameter settings are stored.
Via the vertical softkey bar select the interface:
•
RS-232-C user
•
RS-232-C PG/PC
Position the cursor on the desired directory in the directory tree.
You return to the overview of the higher level directory by pressing the
"Save settings" softkey.
You can discard your settings by pressing the Recall key.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
7
03.04
 Siemens AG, 2004. All rights reserved