Download  Print this page

Spindle Data - Siemens SINUMERIK 840D Operator's Manual

Computerized numerical control system for machine tools.
Hide thumbs

Advertisement

5
03.04

5.7.3 Spindle data

Max./min.
Setting
data
Spindle
data
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Further information
The limit values for the maximum and minimum permissible values
are defined in the machine data.
Function
The value entered for the spindle speed in the fields max./min. must
be within the limit values defined in the machine data. In addition, a
further spindle speed limitation can be active in the program on
account of the SIMS command.
Operating sequence
Select softkey "Setting data".
The vertical softkey bar changes.
Select softkey "Spindle data".
The "Spindle data" window is opened.
Change spindle data:
Position the cursor bar on the appropriate input field and enter a new
value or
select a new value using the "Select" key.
Further information
• The limit values for the maximum and minimum permissible values
are defined in the machine data.
• The "Spindle data" function is displayed only if a spindle is
configured.
Parameters Operating Area
5.7 Setting data
5
5-183

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: