Siemens SINUMERIK 840D Operator's Manual page 253

7
03.04
File name
in tape format
%*_INI
%_N_*_XXX
%MPFn
%SPFn
%Ln
%*
Examples
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
7.3 Formats for saving and importing data
Files are stored in the file tree according to the following strategy:
Converted Interpreted
internal file name internal path
_N_*_INI
/_N_NC_ACT_DIR
_N_*_XXX /_N_XXX_DIR
/_N_NC_ACT_DIR
_N_MPFn_MPF
_N_SPFn_SPF /_N_SPF_DIR
_N_SPFn_MPF
_N_*_MPF /_N_CLIP_DIR
* = any file name
n = any program number (e.g. MPF123)
•
The search strategy is applied only if no path has been
named. Paths detected using the search strategy are
otherwise overwritten by the ";$PATH=" statement.
•
Spaces in the name are ignored.
1. *.MPF files
•
PC format:
Part program
%MPF123
•
Punched tape format:
Part program
%_N_MPF_MPF
2. *.INI files
•
PC format:
Part program
%COMPLETE_TEA_INI (/_N_NC_ACT_DIR)
•
Punched tape format:
Part program
%_N_COMPLETE_TEA_INI
3. Part programs with names that cannot be assigned
•
PC format:
Part program
%HUGO (/_N_CLIP_DIR)
•
Punched tape format:
Part program
%_N_HUGO_MPF
Services Operating Area
Stored
in directory
NC active data
XXX
/_N_MPF_DIR Parts programs
Subroutines
/_N_SPF_DIR Subroutines
Clipboard
Directory: Part program
(/_N_MPF_DIR)
Directory: Part program
;$PATH=/_N_MPF_DIR
Directory: NC active data
Directory: NC-active data
;$PATH=/_N_NC_ACT_DIR
Directory: Clipboard
Directory: Clipboard
;$PATH=/_N_CLIP_DIR
7
/_N_NC_DIR
7-253