Download  Print this page

Siemens SINUMERIK 840D Operator's Manual Page 33

Computerized numerical control system for machine tools.
Hide thumbs

Advertisement

2
03.04
Q
Q
+
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
END
The cursor in the editor moves to the end of the line in the
opened page with this key.
Rapid positioning of the cursor on a group of related input fields.
Cursor down
Move between different fields or lines.
PAGE UP
You "page" up by one display. With the page keys you scroll the
visible/displayed area of the active window. The scroll bar indicates
which part of the program/document/... is selected.
PROGRAM (only OP 010 and OP 010C)
Open the "Program" operating area.
This key has the same function as the "Prog. edit" softkey.
OFFSET = (only OP 010 and OP 010C)
Tool management
Open the "Tools/zero offset" operating area.
This key has the same function as the "Tool zero point" softkey
PROGRAM MANAGER (only OP 010 and OP 010C)
Open the "Program" operating area.
This key has the same function as the "Program" softkey.
ALARM (only OP 010 and OP 010C)
In the main diagnostic display, open the "Messages/Alarms" overview
of alarms.
This key has the same function as the "Alarm list" softkey.
CUSTOM
The customer configures this key.
Initiates a PCU reset
+
Operator Components/Operating Sequences
2.1 Operator panels
2
2-33

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: