Download  Print this page

Hidden Program Lines: Display Hd - Siemens SINUMERIK 840D Operator's Manual

Computerized numerical control system for machine tools.
Hide thumbs

Advertisement

6
Program Operating Area
6.4 Edit programs

6.4.3 Hidden program lines: Display HD

Settings
Machine manufacturer
6.4.4 Reserved character string
6-204
Function
To display hidden, write-protected text (with the identifier;*HD) in the
editor, press the Etc key and the "Settings" softkey.
This function must be set up by the machine manufacturer.
Please note the information supplied by the machine tool
manufacturer!
Function
Reserved character strings occur in part program code lines that arise
by calling cycles and contour programming. They become visible
when activated if the "Display hidden lines" setting is active in the
editor.
The following character strings must not be used in part program lines
that are input directly:
;#
;#END
;NCG
;*RO*
;*HD*
Further information
See Section:
Selective Program Protection RO
Hidden program lines: display HD
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
6
03.04
 Siemens AG, 2004. All rights reserved

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: