Download  Print this page

Siemens SINUMERIK 840D Operator's Manual Page 154

Computerized numerical control system for machine tools.
Hide thumbs

Advertisement

5
Parameters Operating Area
5.4 ShopMill tool management
Tool list
New tool
3D tools
Cutter
...
More
3D tools
Type Name
110
Cylindrical die mill
111
Ball end mill
121
End mill with corner rounding
155
Truncated cone mill
156
Bevel cutter with corner rounding
157
Tapered die mill
Details
5-154
Operating sequence
Select the "Tool list" softkey.
Press the "New tool" softkey.
The vertical bar changes and you can select different tools via the
softkey.
Select the tool location of your choice with the cursor keys
and select the softkey for the desired tool type.
Additional tool types are available via the "More" softkey.
The new tool is created.
In the case of 3D tools, you must define parameters in addition to the
geometry data in the tool list.
Additional parameters
-
Smoothing radius
Smoothing radius
Angle for conical tools
Rounding radius, angle of conic. tools
Angle for conical tools
Press the softkey "Details" and enter the fillet radius and angle for the
conical milling tools.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
5
03.04
 Siemens AG, 2004. All rights reserved

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: