Download  Print this page

Siemens SINUMERIK 840D Operator's Manual Page 260

Computerized numerical control system for machine tools.
Hide thumbs

Advertisement

7
Services Operating Area
7.5 Main services screen
Set
Start
Stop
RS 232 C
user
RS 232 C
printer
RS 232 C
PG/PC
NC card
additional
7-260
The interface parameters of the currently selected interface can be
changed.
Vertical softkeys
Data read-out is started.
The data output operation is aborted.
You can select the RS-232 interface via
RS-232-C user
RS-232-C printer
RS-232-C PG/PC
is selected.
Data can be created, imported or deleted on the NC card.
If the "logical drives" option is set up, the softkeys are displayed (max
of 4 drive connections) via the softkey "additional".
The following applies in the "Services" operating area:
Changes resulting from data transmissions are accepted and
stored. Any modifications are thus retained when the NC powers
up again.
The selected window is closed. The next data tree display is
displayed in the selected view.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
7
03.04
 Siemens AG, 2004. All rights reserved

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: