Download  Print this page

Siemens SINUMERIK 840D Operator's Manual Page 268

Computerized numerical control system for machine tools.
Hide thumbs

Advertisement

7
Services Operating Area
7.5 Main services screen
"ERR EOF"
"Time Out"
"User Abort"
"Error Com 1"
"NC/PLC Err or xxyyzzzz"
"Error DATA"
"Error File Name"
"Tape format illegal"
"Tape format required"
"Rem CREG"
7-268
The end-of-text character has been received but the archive file is not
complete.
Transmission terminated by time-out.
Archive: Not completely transmitted, last file not stored.
Punched tape: Completeness cannot be checked, last file stored.
Transmission terminated with "Stop" key.
Archive: Not completely transmitted, last file not stored.
Punched tape: Completeness cannot be checked, last file stored.
Error at COM1 port
overrun buffer: Overflow at input buffer
overrun: Overflow at COM1 port
parity error: Parity error or
frame error: Frame error (data/stop bits/data transfer rate)
broken line/no DSR: DSR signal missing (wire break)
or BREAK (interruption) was received.
Error message from NC:
xxyy
Error code and error class signaled by the NC
zzzz
HMI Embedded internal error number
The NC cause of error is logged together with a short single-line text.
Data errors:
1. Files with leader/without leader read in,
or
2. Files sent in punched tape format without file names (PCIN).
The file name or path does not follow the naming conventions of the
NC, e.g. special characters in the name or no 3-character extension.
Drive data (binary-coded data) can only be saved in 840D archive
format (punched tape format not active).
Output of logs in punched tape format only.
Reset Register X39: Note that the RS-232 was reinitialized.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
7
03.04
 Siemens AG, 2004. All rights reserved

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: