4.6.1 Function and basic display
Explanation of basic
Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
You can execute part programs fully automatically in "Automatic"
mode; this is the normal operating mode for part machining.
The following conditions must be fulfilled before you can execute part
You have already synchronized the control measuring system
with the machine (i.e. "approached" reference points).
You have already loaded the associated part program in the
You have checked or entered the necessary offset values, such
as work offsets or tool offsets.
The required safety interlocks are already active.
The "Automatic" basic display contains values relating to position,
feedrate, spindle, and tool as well as the block currently being
processed or program pointer.
Like the Jog display, the Automatic display contains actual value,
spindle window, feedrate and tool windows.
If the NC detects G0 during part program execution, the current value
of the rapid traverse override is displayed in the "Feedrate" window.
Machine Operating Area
4.6 Automatic mode