Download  Print this page

Workpiece Template" Function - Siemens SINUMERIK 840D Operator's Manual

Computerized numerical control system for machine tools.
Hide thumbs

Advertisement

6
03.04

6.7.12 "Workpiece template" function

6.8
Memory info
Memory
info
 Siemens AG, 2004, All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
If no _TEMPL_ exists for a workpiece, then you must create a
workpiece named _TEMPL_. The files to be used as _TEMPL_
template files must be set up accordingly.
Operating sequence
If the workpiece already exists, it will be copied and renamed when
you select "New". All files in this directory are also copied into the new
directory.
TEST.MPF
Example:
Workpiece:
_TEMPL_
_TEMPL_.MPF
DATA.INI
TEST.MPF
Select softkey "New"
Name: Define "AXIS"
The new "Axis" workpiece is set up with the following files:
AXIS.MPF
DATA.INI
Function
You can call a display showing the total available NC memory space.
Operating sequence
When you press the "Memory info" softkey, the total free/used
memory is displayed for
NC memory
-
Directories
-
Files
-
in Mbytes.
Program Operating Area
6.8 Memory info
6
6-243

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: