Download  Print this page

Display Or Modify System Resources - Siemens SINUMERIK 840D Operator's Manual

Computerized numerical control system for machine tools.
Hide thumbs

Advertisement

9
Start-Up Operating Area

9.10 Display or modify system resources

Set
password
Delete
password
Change
password
9.10
Display or modify system resources
NC
memory
SRAM
or
Details
References
9-308
Operating sequence
You can set a password via the vertical softkeys,
delete a password and
change it.
Function
You can display the system resources currently in use for the NC and
HMI Embedded areas (utilization display).
Operating sequence
By selecting the Etc key, you can access the "NC memory" softkey
with the appropriate access level.
An overview of the current memory allocation appears when you
press the softkey.
The "Memory overview" window shows the user memory,
• static user memory (SRAM) and
• dynamic user memory (DRAM)
with:
Entire memory
Used memory
Free memory
displayed in bytes.
Further information
Further softkeys are available for displaying more detailed information
DRAM
about the memory capacities.
In these individual windows, you can optimize the memory utilization
by changing the machine data directly.
/IAM/IM2, Installation & Start-Up GuideHMI Embedded,
Chapter 5: Displaying and Editing System Resources
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
9
03.04
 Siemens AG, 2004. All rights reserved

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: