Siemens SINUMERIK 840D Operator's Manual page 236

6
Program Operating Area
6.7 Manage programs
Parts Sub-
programs routines
or
New
OK
or
6-236
The following file types can be entered:
File type Meaning
.MPF
.SPF
.TOA
.INI
.COM
.GUD
.TEA
.SEA
.LUD
.UFR
.EEC
.QEC
.CEC
Creating part programs in part program/subprogram directory:
You can set up main programs and subprograms by opening
directories "Part programs" and "Subroutines".
Select softkey "New" to display a dialog window in which you can
enter the names of the new main programs and subprograms.
The matching file type is automatically assigned in this case.
Then press the "OK" softkey or the "Input" key.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Main Program File
Sub Program File
Tool Offset Active
Initializing data
Comment file
User data (global)
NC-Machine data (Testing Data Active)
Addresses with value assignment
(Setting Data Active)
User data (local)
Zero point offset (User Frame)
Spindle pitch/ sender error compensation.
Quadrant error compensation
Sag/angularity compensation
 Siemens AG, 2004. All rights reserved
6
03.04