6.7.5 Execute a program on the NC for execution
Siemens AG, 2004, All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Workpieces and part programs must be selected for execution before
you press the Cycle Start key.
Select a program:
Use the cursor keys to select a program in the
program overview, e.g. part programs, and
then press softkey "Selection".
The program name is displayed in the "Program name" window at the
Select a workpiece:
A workpiece directory can be selected for machining in the currently
Use the cursor keys to select the workpiece
in the workpiece overview and then
press "Selection" softkey.
Once you have selected the workpiece, change back to the "Machine"
"Automatic" operating area and select "Cycle start" to start machining.
If you start machining in the "Program" operating area, you cannot
track the cycle on the screen.
Please note information supplied by machine tool manufacturer!
/IAM/IM2/ Installation & Start-Up Guide: HMI Embedded
Program Operating Area
6.7 Manage programs