Delete Tools; Change Tool Type - Siemens SINUMERIK 840D Operator's Manual

5
03.04

5.4.11 Delete tools

Tool list
Delete tool

5.4.12 Change tool type

Tool list
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
5.4 ShopMill tool management
Function
Tools can be deleted from the tool list.
Operating sequence
Select the "Tool list" softkey.
Select the tool of your choice.
Press the "Delete tool" softkey and
confirm with "Delete".
The tool data of the selected tool are deleted, and the magazine
location in which the deleted tool was located is enabled.
The tool is not deleted with "Abort".
Function
In the tool list you can change a tool type into another tool type.
Operating sequence
Select the "Tool list" softkey.
Select the desired tool and position the cursor on input field "Type".
You can switch to the tool type you want with the "Alternative" key.
The input fields for the new tool type are displayed.
Parameters Operating Area
5
5-161