Download  Print this page

Siemens SINUMERIK 840D Operator's Manual Page 195

Computerized numerical control system for machine tools.
Hide thumbs

Advertisement

5
03.04
GUD +
GUD -
GUD:
Find
Find next
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
5.9 User data/user variables (GUD, PUD, LUD)
Searching for user data
Press softkeys "GUD +" and "GUD - " to scroll through user data from
GUD 1 to GUD 9.
The "Select global user data" window is opened. The following values
are permissible:
1 = SGUD (Siemens)
2 = MGUD (Machine manufacturer)
3 = UGUD (Machine user data)
4 ... 9 = GD4 ... GD9 (other, e.g. grinding cycles, etc.)
The selected data are displayed in the "Global user data" window.
Select "Find" softkey.
Dialog window "Find user data" appears on the screen.
The data name or a character string within the name can be entered
as the search target. The cursor must be positioned on the user data
to be found.
The next user data with the initial identifier searched for is displayed.
User data of types AXIS and FRAME are not displayed.
Only those local user data that still exist in the execution chain of the
control are displayed.
The list of local user data for the display is updated on every "Cycle
Stop", but the values are updated continuously.
Before global user data definitions can be made operative in the
control, it may be necessary to set machine data.
Further information
How to define and activate user data is described in
Chapter 6: Program operating Area.
Parameters Operating Area
5
5-195

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: