Performance Statistics - Paradyne 8779 User Manual

Table 7-4.

Performance Statistics

Performance statistics can assist you in determining the duration of specific
conditions and provide a historical context for problem detection and analysis.
Statistics are maintained for up to 96 15-minute intervals (24 hours).
Select a port to view the performance statistics. Port 1 is the default.
Use the applicable virtual function keys to page through the intervals and clear
statistics.
T
T
T
8700-A2-GB20-40
Device Messages (2 of 2)
Device Message What Message Indicates
Limit of six Login IDs An attempt to enter a new
reached login ID was made, and the
limit of six login/password
combinations has been
reached.
No Security Records to Delete was selected from the
Delete Administer Login screen, and
no security records had been
defined.
Password Matching Password entered in the
Error – Re-enter Re-enter Password field of
Password the Administer Logins screen
does not match what was
entered in the Password
field.
Please Wait Command takes longer than
5 seconds.
Test Active A test is running and no
higher priority health and
status messages exist.
Select PgUp or PgDn to view more statistics.
Select ClrNear or ClrFar to clear the near- and far-end statistics to zero.
For DSX-1 and G.703 statistics, select ClrStats to clear all statistics to zero.
May 2002
7. Monitoring and Troubleshooting
What To Do
1. Delete another
login/password combination.
2. Re-enter the new login ID.
T
No action is needed.
T
Enter a security record.
T
Try again.
T
Contact your system
administrator to verify your
password.
Wait until message clears.
T
Contact service provider if
test initiated by the network.
T
Wait until the other test ends
and message clears.
T
Cancel all tests from the Test
screen.
T
Stop the test from the same
screen the test was started
from.
7-11