Network Performance Statistics - Paradyne 7610 SNMP DSU User Manual

Monitoring the DSU

Network Performance Statistics

Î
Î
6-8
Performance statistics for the network interface are available to:
Monitor the current status of the network operations.
View the DSU's performance statistics, which:
— Assist you in determining the duration of specific conditions.
— Provide a historical context for problem detection and analysis.
To view the Network Performance Statistics, follow this menu selection sequence:
Main Menu Status
main/status/performance
Device Name:
NETWORK PERFORMANCE STATISTICS
No Signal Count:
Out of Service Count:
Out of Frame Count:
Excessive BPV Count:
Invalid BPV Count:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Refresh ClrStats
All counts show the number of occurrences since the last reset of the counters.
Invalid BPV is a raw count of the number of invalid Bipolar Violations. In the last
column, hhh:mm:ss indicates the amount of time the condition has existed in
hours, minutes, and seconds. When the maximum time has been exceeded,
255:59:59+ appears.
The screen appears with the cursor in the function area below the dotted line. To
update the performance statistics, select Refresh and press Return.
Select ClrStats and press Return to clear all statistics and refresh the screen.
ClrStats is not available for an Access level of 3.
November 1997
Performance Statistics
101920 26:33:08
0
621
99830 144:28:11
87409
ESC for previous menu
Model: 7610
0:00:00
8:53:49
MainMenu Exit
7610-A2-GB20-10
Î Î
Î Î