Printer Service Mode; Service Mode Table; Sp Modes Related To Printer Controller - Ricoh B003 Service Manual

PRINTER SERVICE MODE

3.2 PRINTER SERVICE MODE

3.2.1 SERVICE MODE TABLE

SP No. Description
1001 BitSw#1 Set
1003 Clear Setting
1004 Print Summary
1005 Display Version

3.2.2 SP MODES RELATED TO PRINTER CONTROLLER

The following SP modes are located in the copier SP mode. Refer to section 5.1 of
the main unit service manual.
SP No. Description
5104 A3/DLT Double
Count
5801 Memory All Clear
5907 Plug & Play
7832 Detailed Display of
Self-Diagnostics
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
Adjusts bit switch settings.
Note: Currently the bit switches are not being used.
Not used
Prints the service summary sheet
(An error log is printed in addition to the configuration
page).
Displays the version of the controller firmware.
Specifies whether the counter is doubled for A3/DLT.
0: No, 1: Yes
If # is selected, the total counter and the current user
code counter count up twice when A3 or DLT paper is
used.
Resets data for process control and all software counters,
and returns all modes and adjustments to their defaults
values.
☛ section 5.1.8 of the main unit manual for details.
Selects the brand name and the production name for
Windows Plug & Play. This information is stored in
NVRAM.
Displays the controller self-diagnostic result.
☛ section 3.6 of this manual for details.
3-2
CÓPIA NÃO CONTROLADA
Function and Setting
Function and Setting
SM