Transfer Belt Charge; Mechanism - Ricoh B003 Service Manual

6.14.5 TRANSFER BELT CHARGE

Mechanism

[B]
The high voltage supply board [A] applies the positive current to the transfer belt
[B] through the terminal block [C], terminal plate [D], and the bias roller [E].
The high voltage supply board adjusts the current to the roller to keep a small but
constant current flow to ground through the belt, paper, and drum. If this current is
not kept constant, efficiency of toner transfer and paper separation will vary with
paper thickness, type, environmental condition, or changes in transfer belt surface
resistance.
SM
CÓPIA NÃO CONTROLADA
IMAGE TRANSFER AND PAPER SEPARATION
[C]
[E]
6-71
CÓPIA NÃO CONTROLADA
[A]
[D]
B004D564.WMF
B003/B004/B006/B007