Ricoh B003 Service Manual page 1016

Firmware History for B003/B004/B006/B007
Firmware modified to correct the following:
1. When the undefined command, "<ESC>&k#w" is received, it appears on the output as a
character string [e.g. as "<ESC>&k6w"].
2. The punch error is logged in the error report whenever feeding from the Bypass Tray
under any print job conditions (even when not using the punch unit).
3. When Letterhead is selected as the paper type for the Bypass tray, the tray icon on the
operation panel displays a "2", indicating that Duplex copies can be made (not
permissible by specification).
4. When printing in duplex, the last odd page is printed on the reverse side of the last
sheet.
Change in Specification:
1. Supports the Status Readback function of the PCL5e.
2. PCL5e: Added symbol sets PC-858, Latin 9 and Roman 9 for display of the EURO
currency symbol.
Firmware modified to correct the following:
1. A print job received when the machine switches from On to Off Mode may not be printed
out.
2. After deleting a locked print document, it is possible to press the delete button without
selecting any other locked print documents.
3. The operation panel may flicker slightly after the operator performs settings in the Printer
Features window very quickly (i.e. window is open for a very short time).
Firmware modified to correct the following:
1. Modified for use with the Capture function.
2. Modified so that the printer controller can detect the individual codes in the data headers
of a print job sent with both PCL and PS codes, thereby allowing the machine to switch
between the 2 PDL emulations accordingly (PCL/PS). The A-C2 prints each page in its
original format, even if contained in the same file.
3. Some German umlaut characters cannot be printed out correctly with the following fonts
when using the PCL6 driver on Windows NT4.0/95/ 98/Me: Albertus Medium, Antique
Olive, Humanst521 BT, Zurich BlkEx BT.
Change in Specification:
(Module added for China/Taiwan version).
Firmware modified to correct the following:
1. The machine sometimes freezes after pressing the Offline key while the data is being
printed out (PCL).
2. The machine sometimes freezes while downloading PCL fonts.
3. The machine sometimes does not re-start printing after the paper is removed from the
output tray following an overflow.
4. The machine sometimes freezes when both Stapling and Punching have been selected
from the driver for a paper size with which neither function is permitted.
Firmware modified to correct the following:
1. The machine could not be used with Axis print servers.
2. Part of print data (frame) could not be printed during Custom size printing in PCL 6.
First mass production
CÓPIA NÃO CONTROLADA
Descriptions
CÓPIA NÃO CONTROLADA
Version
3.05
3.02
3.00
2.00.1
1.36
1.35
1.34
Page 4 of 15