Ricoh B003 Service Manual page 973

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – 3502/4002/3502P/4502P
RICOH – AFICIO 1035/1045/1035P/1045P
SAVIN – 2535/2545/2535P/2545P
SUBJECT: FIRMWARE MODIFICATION – NCS (NIB)
GENERAL:
The latest firmware version can be downloaded at the Technology Solution Center FTP Site
http://tsc.ricohcorp.com. Be sure to check the README file for important notes and explanations.
NOTE: Refer to Facts Line Bulletin # FL002 and Publication Bulletin #023 for more information about the
FTP Internet Web Site and EPROM/Flash Card Exchange program.
B003/B004/B006/B007 NCS (NIB) FIRMWARE MODIFICATION
DESCRIPTION OF MODIFICATION
Change in Specification:
1. Changed the default setting of DHCP to ON.
NOTE: When upgrading to this version, the DHCP
setting will only change to ON if it is manually
set or a factory default clear is performed after
update.
2. TCP ports can be opened/closed.
NOTE: After performing the setting to disable
HTTP, it is not possible to access the target
device through the web browser. To change
this setting, use telnet to open HTTP. When the
telnet port is disabled, it is necessary to clear
the network settings (Memory Clear for NCS)
to open the telnet port.
   
Copyright 2003 RICOH Corporation. All rights reserved.
CÓPIA NÃO CONTROLADA
TECHNICAL SERVICE BULLETIN
B003/B004/B006/B007 – 029
CÓPIA NÃO CONTROLADA
FIRMWARE SERIAL
LEVEL NUMBER
G0585921H Nov. '02
production
02/12/2003
FIRMWARE
VERSION
Ver. 1.82