Tech Service Bulletin No. B003/B004/B006/B007 – 015 REISSUE
•
UPDATE 13:
Visual differences:
The old roller (left) contains grooves on the fusing knob end.
OLD PART NO.
NEW PART NO.
AE011064
AE011071
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
CÓPIA NÃO CONTROLADA
Hot Roller – The Hot Roller has been changed due to parts
standardization.
AE01106
AE01107
Hot Roller – 39.8 mm T0.4
CÓPIA NÃO CONTROLADA
DESCRIPTION
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
REFERENCE
QTY
INT.
PAGE
ITEM
1
0
47
Page 7 of 7
17