Ricoh B003 Service Manual page 923

Rev. 09/2002
⇒
4.6.5 B003/B004/B006/B007 PS3 MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
First mass production
1. With print jobs containing mixed duplex/simplex pages,
the job comes out either all simplex or all duplex.
2. When there are different settings set for each page of the
print job (e.g. paper type, size), only one page is printed
out.
3. If an input tray is locked as the priority tray (using Print
Tray Priority) and Auto Continue has been set to "0
minutes", an SC error is displayed when printing out
more than two pages of a PS config. page.
4. The product name for Pointy and Print cannot be
changed.
1. While downloading PS fonts to a machine, the correct
PS serial number cannot be output.
2. PS error occurs when the following conditions have
been met:
- Original size is the same as that loaded in the locked
tray(s).
- The paper type is not specified in the driver.
- "AutoSelect Tray" is selected in the driver.
3. If the machine receives an A5 print job while "Error Skip"
is activated and there is no A5 loaded in any tray, the
operation panel will display "Load A5 Paper (LEF)", even
though specification only supports A5 SEF.
4. Printing out the PS Configuration page:
Even though specification requires the machine to prompt
the operator to load A4/LT plain when there are no trays
containing plain or recycled paper, the machine does not
display the message and allows the configuration page to
be printed out onto any paper type.
SM
CÓPIA NÃO CONTROLADA
(PS3)
4-19
CÓPIA NÃO CONTROLADA
SOFTWARE HISTORY
FIRMWARE FIRMWARE
LEVEL VERSION
G5775906 B 1.00
G5775906 C 1.03
G5775906 D 1.05
B003/B004/B006/B007