1.5 NIB (G574)
!
CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: To install the NIB option, the printer option (B361) must be installed first.
Please refer to section 1.2 for details of the printer option installation
procedure.
1. Remove the left rear cover [A] (2 screws).
2. Remove the controller board [B] (2 screws).
3. Remove the HDD [C] (2 connectors,
3 screws).
4. Remove the NIB slot cover [D].
5. Attach the NIB [E] to the controller board
[F] (2 screws).
6. Re-install the HDD and put back the
controller board.
7. Replace the left rear cover.
SM
CÓPIA NÃO CONTROLADA
[C]
[D]
1-9
CÓPIA NÃO CONTROLADA
NIB (G574)
[B]
[E]
B003/B004/B006/B007
[A]
B361I101.WMF
B361I102.WMF
[F]
B361I105.WMF