Ricoh B003 Service Manual page 905

FIRMWARE MODIFICATION HISTORY
⇒
B003/B004/B006/B007 CONTROLLER SOFTWARE MODIFICATION
DESCRIPTION OF MODIFICATION
The "Can't allocate info" error message
sometimes appears when connected to a
network.
The DMA sometimes fails when receiving
data from the network.
The printer function stalls when jobs are
frequently sent alternating among different
drivers.
Modified to allow use of the Capture function.
Following a Detailed Self-Diagnostic, SC819
occurs when the diagnostic report is being
printed out.
SC997 occurs when one of the MFP
application keys is pressed just after the
power is turned on.
A black line appears along the trailing edge of
DF copies under the following conditions: 1
2 job, Create Margin, A4/SEF originals and
paper.
SC819 occurs under the following conditions:
Sort job, Mixed Original Sizes, optional
memory not installed.
The last page of a 1
job is printed out on the opposite side when
using paper with a set front/back orientation
(e.g. letterhead, punched paper).
The following display has been changed:
Old: Cannot communicate with external
server.
New: Cannot deliver the data. Check the
server. ##......## ("#"= server's IP address).
If an error occurs during the self-diagnostic at
power On (e.g. NIB error), the machine
sometimes does not display the time on the
operation panel.
The GW-MAC control function has been
added.
Correction for a problem that occurred when
using 5.19.1 with certain production software
at the factory.
When using the memory dump function of Fax
SP mode, the memory address cannot be
entered.
B003/B004/B06/B007
CÓPIA NÃO CONTROLADA
HISTORY
2 odd-numbered copy
8-6
CÓPIA NÃO CONTROLADA
Title FIRMWARE
"Can't allocate
B0045102 H
info" error
DMA failure
Printer
B0045102 J
application stalls
Capture function
B0045102 K
SC819
SC997
Black line along
trailing edge
with Create
Margin
SC819
Last page
printed out on
opposite side
(copier)
Display changed
Time not
displayed at
power On.
GW-MAC
B0045102 L
function
Cannot enter
B0045102 M
memory address
Rev. 09/2002
FIRMWARE
LEVEL VERSION
3.08.5
3.09.1
5.19.1
5.19.2
5.21
SM