Ricoh B003 Service Manual page 675

BIT SWITCHES
System Switch 16
No FUNCTION
0 Parallel Broadcasting
0: Disabled
1: Enabled
1 Priority setting for the G3 line.
0: PSTN-1 > PSTN-2 > PSTN-3
1: PSTN-2 > PSTN-3 > PSTN-1
2 Changing the I-G3 modem
default.
0: PSTN-1
1: PSTN-2
3 Line used for I-G3
transmissions
0: Allowed to change
1: Fixed
4-7 Not used
System Switch 17 - Not used (do not change the settings)
System Switch 18 - Not used (do not change the settings)
System Switch 19
No FUNCTION
0-5 Not used
6 Extended scanner page
memory after memory option
is installed
0: Disabled
1: Enabled
7 Special Original mode
0: Disabled
1: Enabled
System Switch 1A - Not used (do not change the settings)
System Switch 1B - Not used (do not change the settings)
System Switch 1C - Not used (do not change the settings)
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
1: When the G4 or/and G3 unit is installed, the
machine sends messages simultaneously using
both available ports (PSTN/ISDN) during
broadcasting.
This function allows the user to select the default G3
line type. Optional SG3 units are required to use the
PSTN-2, PSTN-3 setting.
This function allows the user to select the default I-
G3 modem. The optional SG3 unit and ISDN unit
are required to use the PSTN-2 setting.
0: The machine will place priority on the line
selected by the above bit 2 for I-G3 transmissions.
1: The machine will always use the line selected by
the above bit 2 for I-G3 transmissions.
Do not change the settings.
Do not change the settings.
0: After installing the memory expansion option, the
scanner page memory is extended to 4 MB from 2
MB.
1: If this bit is set to 1 after installing the memory
expansion option, the scanner page memory is
extended to 12 MB. But the SAF memory decreases
to 18 MB.
1: If the customer frequently wishes to transmit a form
or letterhead which has a colored or printed
background, change this bit to "1". "Original 1" and
"Original 2" can be selected in addition to the "Text",
"Text/Photo" and "Photo" modes.
3-18
CÓPIA NÃO CONTROLADA
SP No. 1-101-023
COMMENTS
SP No. 1-101-026
COMMENTS
SM