Ricoh B003 Service Manual page 632

[A]
[F]
8. Remove the NCU unit [A] (2 screws).
9. Attach the option NCU unit [B] to the lower portion of the reverse side of the
NCU unit (2 screws) as shown. Attach the telephone jack [C] to the bracket [D],
run through the harness through the lower hole [E] in the NCU bracket, then
secure the telephone jack bracket to the NCU unit (1 screw).
10. Connect harness [F] to the option NCU board, then clamp the harness as
shown.
11. Attach the NCU unit [G] to the machine (2 screws), and slide the FCU board
into the machine. Then run through the harness [H] as shown.
12. Attach the ferrite core [I] to the harness.
SM
CÓPIA NÃO CONTROLADA
[B]
B360I103.WMF
B366I104.WMF
1-9
CÓPIA NÃO CONTROLADA
FAX UNIT
[C]
[D]
[E]
B366I103.WMF
[H]
[I]
B366I106.WMF
[G]
B003/B004/B006/B007