Ricoh B003 Service Manual page 926

Rev. 09/2002
⇒
1. FIRMWARE HISTORY
1.1 FIRMWARE MODIFICATION HISTORY
1.1.1 B003/B004/B006/B007 ENGINE (BICU) FIRMWARE HISTORY
B003/B004/B006/B007 ENGINE SOFTWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
First mass production
"Please wait" message does not clear when
there is paper in between the duplex unit and
unit's cover.
When feeding HLT or A5 lengthwise from the
bypass tray, horizontal black lines appear
about 180mm from the leading edge.
Fax image is not output when "Standard" is
selected and the tray's main scan registration
adjustment value (SP1002) is set at –9.0mm.
When the value of SP1002 is between
- 8.9mm and –8.0mm, images do not appear
in the area approximately 1mm from the main-
scan leading edge.
Image problem occurs only in outputs made
just after the main power is turned on (e.g.
output completely black, blurry images).
After the power is turned on, the first output
shows a black stripe at the sub-scan leading
edge.
When a Finisher SC occurs, it becomes
impossible to start any other job (even those
not using the Finisher).
After SP5801 (Memory Clear) is performed,
the default value for SP1001-01 is changed to
"0".
The Tray Full display is not cleared even after:
the main power is turned off, the paper is
cleared from the tray and the main power is
turned on again.
SP6006-05 (DF trailing edge erase
adjustment) has been newly added to ensure
that the trailing edge of the original does not
appear on the copy.
Note that this cannot be used for the Fax and
Scanner applications.
SM
CÓPIA NÃO CONTROLADA
FIRMWARE MODIFICATION HISTORY
Title
"Please wait"
does not clear
Horizontal black
lines
Fax image is not
output
Images do not
appear in the
main-scan
leading edge
area
Image problem
occurs after
main power is
turned on
Black stripe at
the sub-scan
leading edge
Finisher SC
Memory Clear
problem
Tray Full display
is not cleared
SP6006-05
added
16-1
CÓPIA NÃO CONTROLADA
FIRMWARE FIRMWARE
LEVEL VERSION
B0045112 C 2.15.04
B0045112 D 2.16.05
B0045112 E 2.16a.05
B0045112 F 2.19.05
B003/B004/B006/B007