Ricoh B003 Service Manual page 264

SERVICE PROGRAM MODE
•
System Counts
Other SCs
Count Timing SC's generated other than those listed above for Scanner, IPU, Printer.
No Counts ---
Other ---
Operation Time
Count Timing Operation time of the main motor in increments of 100 ms.
No Counts ---
Other Counts scanner and ARDF operation time when these devices are
operating alone so these counts will not match the time count for drum
rotation.
• Application Software Counts
Original Total for Copy Application
Count Timing Counts the number of times the size of an original is detected for every
original feed-in.
Other For double-sided originals, counts 1 the first time the backside is set.
Inverting is not counted. This count is different from the ADF Feed-ins
reading described above.
Copy Total for Copy Application
Count Timing Feed-ins started.
Other Blank (white) pages output.
• Mode Counts for Copy Application
Copies by Magnifications
Reduction (25%~49%)
Reduction (50%~99%)
1:1
Enlargement (101%~200%)
Enlargement (201%~400%)
Custom (Paper, dimensions,
area, etc.)
Count Timing
Other
Copies by Color
Black Copies
Red Copies
Blue Copies
2-Color Copies
Count Timing
Other
Copies by Quality Mode
Text/Photo Mode
Photo Mode
Photo Original Mode
Pencil Original Mode
Count Timing
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
Number of executions for each magnification category.
Also counts white (blank) copies, and the number of
times the operation panel keys are operated for
zooming. For example, an AMS 71% copy is not
counted for 50%~90%.
Feed-in starts for each category. Counts according to
the selection information of the basic screen.
Also counts white sheets according to the mode.
Feed-in starts for each category. Counts according to
the selection information of the basic screen.
5-58
CÓPIA NÃO CONTROLADA
SM