Ricoh B003 Service Manual page 984

Tech Service Bulletin No. B003/B004/B006/B007 – 032
UNITS AFFECTED:
All B003 copiers manufactured after the serial numbers listed below will have the new style Snap Ring, Rear
Terminal – Charge Roller, Front Terminal – Charge Roller, Receptacle – Charge Roller installed during
production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
CÓPIA NÃO CONTROLADA
MODEL NAME
Gestetner 3502 H70367xxxxx
Savin 2535 H70367xxxxx
Gestetner4502 H71367xxxxx
Savin2545 H71367xxxxx
Lanier5635 L078388xxxxx
Lanier5645 L079387xxxxx
Ricoh Aficio 1035 H70367xxxxx
Ricoh Aficio 1045 H71367xxxxx
CÓPIA NÃO CONTROLADA
SERIAL NUMBER
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
Page 2 of 2