Ricoh B003 Service Manual page 968

Rev. 01/2003
B003/B004/B006/B007 CONTROLLER SOFTWARE MODIFICATION
DESCRIPTION OF MODIFICATION
Program added for Korean language display
(with the addition of the Korea model).
NOTE: To display the Korean language on
models other than the Korea model, it is
necessary to install both the LCDC firmware
from service Card V2.03KOR and controller
firmware V5.22.
The tray selection screen is sometimes not
displayed on the mainframe panel at Power
On with coinlock-connected machines.
The Key Card and Coin Lock setting screens
⇒
now appear in the System Settings.
An SC is cleared with power off/on, however
the RSS error flag is not cleared, causing the
S. Sense remote monitoring system to
incorrectly detect a machine error condition.
The message for the Key Counter/Key Card
mis-set or User Code input screen is not
displayed correctly.
The page number is not displayed correctly on
1-to-2 copies made with Designate Chapter
mode.
A failure occurs with the cluster recovery
processing for a certain system area after an
SC863 (HDD error), and the SC cannot be
cleared with power off/on.
If an original is scanned for preset job while a
job is in progress, and this job in progress is
stopped due to such conditions as a Paper
End, the preset job is cleared.
SM
CÓPIA NÃO CONTROLADA
FIRMWARE MODIFICATION HISTORY
HISTORY
Title
Add Korean
language
Display error
w/coinlock-
connected
machines
Key Card, Coin
Lock display
RSS flag not
cleared
Message display
error
Page numbering
error
SC863 (HDD
error)
Preset job
canceled
16-7
CÓPIA NÃO CONTROLADA
FIRMWARE FIRMWARE
LEVEL VERSION
5.22
B0045102 N
5.23
B0045102 P
5.26
B0045102 Q
B003/B004/B006/B007