Printer Controller Service Mode; Service Mode Menu ("1. Service Menu"); Bit Switch Programming - Ricoh G176 Service Manual

Rev. 10/2008

5.2 PRINTER CONTROLLER SERVICE MODE

5.2.1 SERVICE MODE MENU ("1. SERVICE MENU")

SPMode Description
1001 Bit switch
1003 Clear Setting
Print
1004
summary
1005 Disp Version
⇒

5.2.2 BIT SWITCH PROGRAMMING

1. Enter the sp mode, select "Service Menu", then press [Enter] twice.
2. Select the desired bit switch, then press [Enter].
[ ] [ ]: Move to the next switch.
3. Adjust the bit switch using the following keys.
[ ] [ ]: Move to the next bit.
[Escape]: Exit without saving changes.
[Enter]: Exit and save changes.
The left digit on the display is bit 7 and the right digit is bit 0.
4. Press [Enter] to save changes and exit.
Bit
Title
Sw 8
[PS]: Orientation
6
Auto Detect
Function
[PDF]: Orientation
7
Auto Detect
Function
• To access Orientation Auto Detect, update the Printer firmware to v1.09 or later.
SM
Adjusts bit switch settings.
Initializes settings in the "System" menu of the user mode.
Prints the service summary sheet (a summary of all the
controller settings).
Displays the version of the controller firmware.
Explanation
Automatically chooses page orientations of
PostScript jobs (Landscape or Portrait)
based on the content.
Automatically chooses page orientations of
PDF jobs (Landscape or Portrait) based on
the content.
5-3
Printer Controller Service Mode
Function
Settings
0
Enabled Disabled
Enabled Disabled
G176/G177/G176L
1 Default
0
0