Table of Contents
Advertisement
1.1.4 G3 INTERFACE UNIT TYPE 1045 INSTALLATION
[B]
[A]
!
CAUTION
Before installing this option, do the following:
1. If there is a printer option in the machine, print out all data in the printer
buffer.
2. Press the operation switch to enter standby mode. Make sure the power
LED is not lit, then turn off the main switch and disconnect the power
cord and the network cable.
1. Remove the small cover [A] (1 screw) and the connector [B].
2. Remove the rear cover [C] (2 screws), the rear upper cover [D] (2 screws) and
the rear lower cover [E] (4 screws).
3. Remove the FCU cover [F] (2 screws) and controller unit (2 screws).
SM
CÓPIA NÃO CONTROLADA
[D]
B360I101.WMF
[E]
B360I104.WMF
1-7
CÓPIA NÃO CONTROLADA
FAX UNIT
B360I102.WMF
[F]
B003/B004/B006/B007
[C]
Advertisement
Table of Contents
Troubleshooting
