Table of Contents
Advertisement
PRINTER INSTALLATION
22. Do not connect the parallel cable at this point. Turn the machine on and check
the setting of the following copier SP mode:
• SP5-907: Plug & Play Name - select the correct one.
23. Print out the configuration page to check if the printer controller is installed
properly.
(Configuration page: User Tools/ Printer Settings/ List Test Print/ Config. Page)
24. If the parallel cable is going to be connected, first turn off the machine. After
connecting the cable, turn the machine back on.
B003/B004/B006/B007
CÓPIA NÃO CONTROLADA
1-6
CÓPIA NÃO CONTROLADA
SM
Advertisement
Table of Contents
Troubleshooting
