Ricoh B003 Service Manual page 539

[A]
[D]
6. Open the left front cover [A] of the mailbox, and remove the inner plate [B] (3
screws).
7. Install the guide plate bracket [C] (4 screws - M4 x 4).
8. Route the cable [D] and affix it to the clamp as shown.
9. Connect the cover switch [E] to the cable then install the cover switch (2 screws
– M4 x 8).
10. Remove the paper guide plate [F] (2 screws).
SM
CÓPIA NÃO CONTROLADA
BRIDGE UNIT FOR MAILBOX (G912)
[B]
G912I503.WMF
[F]
G912I505.WMF
[D]
15-17
CÓPIA NÃO CONTROLADA
[C]
G912I504.WMF
[E]
B003/B004/B006/B007