Ricoh B003 Service Manual page 561

Paper Sensor Installation
[A]
B358I518.WMF
[H]
B361I110.WMF
Perform steps 18 to 20 only if the optional bridge unit has been installed.
If it has not been installed, go on to step 21.
18. Remove the connector cover [A] and bridge unit [B] (2 screws, 2 connectors).
19. Open the right cover [C] of the bridge unit and peel off the black tape [D], then
pull out the connector [E].
20. Install the paper sensor [F] (1 screw, 1 connector) and reinstall the bridge unit.
Completion
21. Remove the bottom cap [G] of the operation panel. Install the Printer key [H]
on the operation panel as shown.
SM
CÓPIA NÃO CONTROLADA
[D]
[B]
[G]
1-5
CÓPIA NÃO CONTROLADA
PRINTER INSTALLATION
[F]
[E]
[C]
B358I517.WMF
B003/B004/B006/B007